© 2019 mPTech
. All rights reserved.
myPhone Pocket PRO
12
7. Before the first start
7
.1 Installation of the SIM card (s) and/or microSD memory card
The device is a cellular phone made in Dual SIM technology (2 SIM cards
handling) allowing the use of two mobile networks simultaneously.
To insert the SIM card(s) correctly,
turn off your smartphone. Use the
supplied tool to open (insert the
tip energetically into the hole) and
slide out the card tray. Insert the
SIM card/s into the slot in
accordance with the pictures
placed above the slot/s and slide
the tray back in.
Turn off the phone to insert the
memory card correctly. Using the
supplied tool, open and slide out
the card tray and insert the
memory card into the slot as
shown (instead of the SIM card).
Now, gently slide the card tray
back into the slot.
Use only memory cards recommended by the manufacturer. Pay attention to
the selection of the proper format-the microSD card, capacity and type/class.
Incompatible memory cards may damage the device and cause the stored data to
be destroyed as well. Incompatibility of memory card can be caused, among others,
by an incorrect card format (required format microSD) or an unsupported card
capacity - above the value recommended by the manufacturer.
7.2 Charging the battery
Use only chargers and wires recommended by the manufacturer. Using
incompatible chargers or cables can cause explosion of the battery or damage
to your device.
Incorrect charger connection (USB cable) can cause damage to the AC adapter
or the device. The damages resulting from improper handling
are not covered by the warranty.
The device can heat up during charging. It is a regular occurrence and should
not affect the stability or performance of the device.
If the phone does not charge properly deliver it (with the charger) to a service
center of the manufacturer.
The battery may only be replaced by an authorised service centre.
