© 2019 mPTech
. All rights reserved.
myPhone Pocket PRO
13
Charge the battery before the first use.
The battery should be charged by the attached charger or another charger,
intended for this type of equipment.
If in doubt, contact your dealer or the
manufacturer's Authorized Service Center.
When the battery is near a complete discharge, the notification is displayed on
a low battery charge. To continue use of the device charge the battery. If the
battery is completely discharged the device can not be switched on even when
the loading process is ongoing.
Before the device can be turned on again, the battery has to be charged for at
least a few minutes. In case of any problems with the battery or if in need of a
replacement, the device should be delivered to the manufacturer's service
center.
To charge the battery one should:
1.
Plug the microUSB plug of the cable from the set into the socket on the
device.
2.
Plug the USB plug of the cable from the set into the charger and this plug
into the mains socket. When charging has started, a lightning symbol will
appear in the top right corner of the screen on the battery icon, and when
the device is turned off, an animation showing the battery charge level
should appear.
3.
When the charge reaches 100% it means that the battery is fully charged.
Finish the charging.
4.
Disconnect the charger from the mains socket and the cables from the
charger and the phone.
8. Buttons
Menu (virtual)
•
Pressing it will cause the list of open apps to appear, where you can switch
in-between or turn them off.
Home (virtual)
•
One quick press takes you to phone desktop. A longer press launches
Google Assistant.
Back (virtual)
•
Press to exit the application / return to the previous screen.
Blockade on/off button
•
One quick press locks/unlocks the screen.
•
Pressing the button for about 2 sec. will cause:
o
If the smartphone is off - the device would switch on.
o
if the smartphone is switched on - calling up a menu that allows you to
switch off the device, restart the system, take a screenshot.
Volume increase and decrease buttons
•
Pressing during a voice call will cause an increase or decrease of the audio
