background image

rev01_22

2. INTENDED USE AND APPLICATION

MYASTER operator is designed to automate swing gates. 

The use of this product for purposes other than those described and installation executed in a manner 

other than as instructed in this technical manual are prohibited. 

All MYASTER systems are locked, therefore no electric-lock is needed.

In case of power cut the gate operator can be easily released by manual operation.

1

Connect the automation to the earth system, which must be efficient and properly carried out.

The installation of automatic doors and gates must comply with the Machine Directive 2006/42/CE, in 

particular EN 12453 and performed by qualified personnel only.

Make sure the main power line is equipped with state of the art safety grounding system; as well be 

sure the whole installation is protected by a power cut switch and against overcurrent.

Make sure the area is clear from flammable gases and/or electromagnetic interferences: it could lead 

to very dangerous injuries.

Switch the power and batteries OFF before any operation.

After installation, packaging and waste materials (cardboard, plastic, metal parts etc.) must be kept 

away from children as they could be potentially harmfull. 

Use only original spare parts. Any alteration to the system is prohibited.

Proteco Srl will not respond in case of using additional and/or fake spares.

Before commissioning the system, deliver the last pages of this manual to the user

.

Proteco S.r.l. reserves the right to make changes to the product without notice.

1. WARNINGS

This manual contains important information concerning personal safety. An incorrect installation or an 

improper use may lead to severe injuries.  Read carefully and store for future use. 

Pay particular attention to this symbol 

Double leaf composition

1

2

3

4

01
02
03
04

n°2

1

n°2
n°2

Operators
Fitting bag
Release keys

C

apacitors

Installation manual

n°1

Summary of Contents for MYASTER 3 NEW


















Reviews: