Manuale di installazione
Fig. A
Fig. B
Fig. C
Fig. D1
Fig. D2
17
1
)
2
)
3
)
4
)
5
)
6
)
OVERHEAD DOORS
(Adapter PARC01 available as optional)
Open the door fully.
Insert the inox cable inside the trolley (fig.A)
Cut the breaket (useless in case of overhead doors) as shown in fig. B and fix it on the door, beside the adapter.
Insert the inox cable into the black membrane and pass it through the special slot on the door (fig.C)
Fix the inox cable to the lock release (fig.D1) or to the handle (fig.D2).
Make sure the cable is properly tightened so as to unlock when the handle is turned.
Cut the exceeding cable if necessary.
The manual release operation must always be performed when the automation is still.
rev0
2
_19
