8
E1.
SETTING THE LIMIT SWITCH IN OPENING
E2.
SETTING THE LIMIT SWITCH IN CLOSING
E. PROGRAMM
ING
Press “P” and hold for 8 seconds, to start programming. Once
adjustments are done, press “P” and hold for 8 seconds again to save the settings
and gou out of the programming mode.
PRELIMINARY COMMISSIONING
a) Lock the clutch and gently move the door to closing position.
b) Power the garage door opener: the courtesy light
turns on
, the display
shows a "
0"
rotating clockwise and the control unit "
beeps
" once.
Press “
P
” and hold for
8 seconds
The control unit beeps and
shows “
1
”
Press “
P
”, “
1
”
starts flashing
Press and hold “
+
”
...until the door reaches the
desired opening position
Press “
P
” to save
Press “
+
” to set “
2
”
Press and hold “
-
”...
Press “
P
”, “
2
”
starts flashing
...until the door reaches the
desired closing position
Press “
P
” to save
rev0
2
_19
