Page
12
of
24
11.
Boost Timer
eddi
can be programmed to 'boost' the heating for each heater at certain times. Boost, means that the heater
will be at full power regardless of the amount of available export power. This means that power may be drawn
from the mains grid supply during boost times.
There are four editable time slots for each heater.
Setting the duration to 0h00 will make the boost inactive
11.1
Programming Boost Times
Step 1:
From the main screen, press (X) to enter the Main Menu.
Step 2:
Select Boost Timer by pressing (
↓
) until the option is
highlighted, then press (
).
Step 3:
Select the heater you wish to program the boost times
for (e.g. Heater 1) and then press (
).
Step 4:
The BOOST TIMER screen is then shown.
Step 5:
The boost can now be edited. Use the (
↑
) or (
↓
) arrow buttons to highlight the time slot you wish
to change. The screen above shows the start hour being edited.
Step 6:
Alter the start hour with the (
↑
) or (
↓
) arrow buttons and then press (
) to move to minutes.
Step 7:
Edit the duration in the same way and then press (
) again to edit the days of the week you want the
boost to be active for; each day of the week and can be toggled on/off with (
↑
) or (
↓
) arrow buttons, press
(
) to go to the next day. Pressing (
) on the last day (Sunday) will confirm the boost time slot and the whole
line will be highlighted again.
Step 8:
Press (X) to exit the BOOST TIMER screen.
Summary of Contents for eddi 16A1P01H
Page 6: ...Page 6 of 24 ...