8
The MWC2-8 receiver uses the Secure Grip Mounting Band. Mounting the receiver is now quick, secure and
discrete. It is required that the Secure Grip Mounting Band always be used when installing MYE Entertainment
MWC2-8 receivers.
Atta
ching the Receiver
Wrap the Secure Grip Band around the intended
mounting pole and cut to fit. Do not overlap ends or
have a gap over 1/8”. Secure the Grip Band with 1
MYE Entertainment nylon tie in the center channel.
OFFSET the knuckle of the nylon tie from center by
approximately 1/4”.
Trim the excess nylon tie
Install the Mounting Base over the nylon tie
knuckle. Insert two MYE Entertainment nylon ties
into the holes opposite the tie knuckle hole.
Seat the nylon ties into the corresponding
channels of the Secure Grip Band.
Pull the nylon ties tight to align all 3 tie knuckles.
Trim all excess nylon tie completely.
Before you begin: Unscrew the MOUNTING BASE ASSEMBLY from the receiver by using the
FRONT MOUNTING SREWS. (See page 3 – Receiver Assembly Front View.)
