10
IntelliJack - Self Diagnostic Headphone Jack
The IntelliJack self diagnostic headphone circuit detects when the headphone
jack has failed or been damaged. When a faulty headphone jack is detected, a
flashing “headphone” icon appears in the LCD display. It will remain on until a
new jack is installed and the icon reset.
To Replace the Intellijack:
1. Loosen the two screws evenly on the bottom of the IntelliJack module and
remove.
2. Carefully insert new IntelliJack module without bending contact pins.
3. Reset the Icon. Turn MYE Entertainment receiver OFF then press and
hold the “Power” button for 3-4 seconds. When the “headphone” icon
appears again release the Power button.
IMPORTANT NOTICE:
Faulty headphones can trigger the faulty headphone jack icon. It is
important to test the headphone jack prior to replacement. If the headphone jack is deemed OK
simply follow step #3 above to reset the faulty headphone jack.
