Mar 24, 2009 (Version 4) www.myeclubtv.com Page 21/24
5-4 AUTO DEFAULT* – uses Vibration Detect “ON”
Assigns a channel as the HOME auto default channel that a viewer is sent to:
1) Directly after the designated time is for the Default Channel upon TV power “On.”
2) Directly after no vibration is detected after the designated time for Vibration Detect.
3) When the HOME key is pressed on the keypad.
C usto m Features
5-5 Auto Power ON
Used to change the TV POWER “On” from Factory setting “Off.”. Upon being energizing from a NO POWER
state the TV will automatically turn on.
C usto m Features
1) Press CH
ST
to select AUTO DEFAULT.
2) Press
VOL
S
only to select “ON.”
3) Press
CH
T
to select MANUAL CH SETTING.
4) Press
VOL
S
only to enter.
5) MANUAL CHANNEL SETTING menu (OSD) will
appear.
6) Press
CH
ST
to select desired default channel.
7) Press
VOL
S
only to select “AUTO DEFAULT.”
a. This channel is now assigned as the default
channel when the TV vibration detect
sensor is turned to “ON.”
8) The AUTO DEFAULT channel can be set as the
CHANNEL DEFAULT as well.
a. For step #7 press VOL
S
only and select
“CHANNEL DEFAULT & AUTO DEFAULT.”
9) Press EXIT or VOL
T
to exit / lock settings.
1) Press CH
ST
to select Auto Power On.
2) Press
VOL
S
to enter / change setting.
(On – Off)
3) Press EXIT or VOL
T
to exit / lock settings.
Enter Custom Features Menu…
Enter Custom Features Menu…
