original operating instructions mycusini
For questions please contact us at [email protected]
7.6 Notifications
•
New Updates will be seen in the Notification function
8 Troubleshooting
By selecting mycusini you have chosen a product that has a state-of-the-art
construction and is operationally safe.
Despite this, problems or disturbances may occur. For this reason, a guide to
solve potential problems is given in the following: Observe the safety information!
After start-up, the 3D printer is not working. The LED switch does not light up
and the printer does not move to the home position:
• Check the connections to the power supply.
• Check the power socket. Is it being supplied with current?
After several minutes no movement of the printer occurs, the user interface,
however, is visible on the computer/laptop/tablet:
• Switch off the mycusini, wait at least 20 seconds and turn it back on.
Despite an audible movement of the motor and the fill level display, there is no
food coming out of the dosing tip:
