MyBinding Plockmatic FTR 200, Service Manual

Page: 46 / 79

T
rouble-
shooting
FTR-4-1
12 February 2007
4. TROUBLESHOOTING
4.1 FAULT CODE DESCRIPTIONS
Fault Item Fault description Page ......
code No. No.
FTR-001 FTR-M1 Transport motor No displacement pulses FTR-4-2
FTR-002 FTR-M1/M2 Transport motor and Trim knife motor Cycle time out FTR-4-3
FTR-003 FTR-M1 Transport motor Short circuit FTR-4-4
FTR-004 FTR-M1 Transport motor Open circuit FTR-4-4
FTR-005 FTR-M2 Trim knife motor Short circuit FTR-4-4
FTR-006 FTR-M2 Trim knife motor Open circuit FTR-4-5
FTR-007 FTR-M3 Stop gate motor Cycle time out FTR-4-5
FTR-008 FTR-M3 Stop gate motor Short circuit FTR-4-6
FTR-009 FTR-M3 Stop gate motor Open circuit FTR-4-6
FTR-010 FTR-M4 Stop gate positioning motor No displacement pulses FTR-4-6
FTR-011 FTR-M4 Stop gate positioning motor Cycle time out FTR-4-7
FTR-012 FTR-M4 Stop gate positioning motor Short circuit FTR-4-7
FTR-013 FTR-M4 Stop gate positioning motor Open circuit FTR-4-8
FTR-014 FTR-M5/M6 Blower motor(s) Open circuit FTR-4-8
FTR-015 FTR-Q13 Infeed sensor is Faulty FTR-4-8
FTR-016 FTR-S2/S3 Control switch infeed or out feed Faulty FTR-4-9
FTR-017 FTR-Q6 Outfeed sensor Trimmer is Faulty FTR-4-9
FTR-018 FTR-Q8 Trim bin full sensor is Faulty FTR-4-10
FTR-150 36V Input low FTR-4-10
FTR-151 36V Input high FTR-4-10
FTR-152 FTR-S9/S10 Interlock switch faulty FTR-4-11
FTR-201 FTR-Q13 Infeed sensor was Not blocked within timeout FTR-4-11
FTR-202 FTR-Q13 Infeed sensor was Blocked exceeding timeout FTR-4-11
FTR-203 FTR-Q6 Outfeed sensor Trimmer was Not blocked within timeout FTR-4-12
FTR-204 FTR-Q6 Outfeed sensor Trimmer was Blocked exceeding timeout FTR-4-12
FTR-205 FTR-S2/S3 Infeed shaft or Outfeed compressing bracket
not in lower position FTR-4-12
FTR-401 Trim bin full FTR-4-12
FTR-501 Trim bin full FTR-4-12
FTR-502 Trimmer fan missing FTR-4-13
FTR-503 FTR-Q6 Stacker full FTR-4-13
FAULT CODE DESCRIPTIONS