My Water Filter ULTRAPURE Aragon, Installation Instruction

Page: 8 / 16

2. How to Install the Under Sink Faucet:
1. Before you start, take some time to ensure there are no hazards or electricity that can
harm you.
2. Ensure you are a competent installer, otherwise, ask for assistance from a plumber.
3. Select the best position where you would like to install your drinking water faucet on
your sink or bench top.
4. Once the best position is determined BEFORE YOU DRILL make sure you are able
to locate the thread of the faucet under the sink to tighten the nut once the faucet hole
has been drilled and the faucet is pushed through the hole. Ensure you are able to fill
your kettle & other home appliances you use under the selected faucet position.
5. Stick a piece of 1cm x 1cm tape over where you are going to drill your hole for your
faucet. This will secure your drill bit so it does not move around on the smooth steel sink
or benchtop and create any damage.
6. Use a centre punch or pointed object to mark a spot where to drill if drilling into steel.
7. Drill a pilot hole through the steel sink or benchtop using a small drill bit around a
3mm to 5mm. Then drill a 12.5-millimetre hole through the pilot hole big enough for the
faucet shaft to fit through. (If drilling a stone bench top get a competent person)