manualshive.com logo in svg

My Water Filter ULTRAPURE Aragon, Installation Instruction

Share
Download
My Water Filter ULTRAPURE Aragon Installation Instruction Download Page 14

CARTRIDGE POSITIONS

​

: 

Fluoride Removal Cartridge - position 1 
Aragon  Cartridge - position 2 
 
7. Ensure the Fluoride Removal Cartridge is installed into position 1 and remove the 
cartridge from position 2.  
 
8. Screw back on the two housings and tighten.  

ENSURE NO CARTRIDGE

​

 is installed into position 2. Housing 2 must be empty before 

starting the flushing procedure. 
 

 

 

 

 

 
9. Slowly turn on the water. The filter will only take a minute to fill. Keep the water 
flowing only flushing the cartridge in position 1 for a minimum of 10 minutes. 

NOTE

​

: The Fluoride Removal Cartridge works very well at removing Fluoride from the 

water, however, this 

​

MUST 

​

be flushed for a minimum of 10 minutes. 

 
10. After flushing the Fluoride Removal Cartridge for 10 minutes turn off the water and 
follow the same procedure to install the Aragon Cartridge into housing position 2. No 
need to remove the cartridge in position 1. 
 

Summary of Contents for ULTRAPURE Aragon

















Reviews:

No comments

Brands by name

Popular brands

Load more brands