8
mylifemyshop.com
Every Other Measurement
1. Make sure your scale is on a hard flat surface (not carpet) and has been
initialized.
2. The
Body Analyzer 1
uses “Sense-On Technology” and automatic user
detection, so simply step onto the platform to take your measurement.
2. If you are taking a complete measurement, be sure to remove your shoes
and socks. You must have bare feet to obtain body fat and total body water
measurements.
• The condition of your skin on the bottom of your feet can affect the
reading. To get the most accurate and consistent reading, wipe your
feet with a damp cloth, leaving them slightly moist before stepping on
the scale.
3. Step onto the platform and ensure that your feet are in good contact with
the 4 stainless steel contact pads on the platform.
4. Stand still, and remain on your
Body Analyzer 1
until the complete readout
is displayed.
5. Your weight will display followed by moving measurement indicators.
6. After 2-3 seconds, your weight will be joined by your body fat %, body
water %, muscle mass %, and bone density measurements.
7. You may step off of the scale; the measurements will continue to be
displayed for 10 seconds, after which time the scale will turn off.
Note:
When the body fat reading displays, a horizontal bar will appear below the
body fat reading. This corresponds to the Low, Normal, Moderate, and High
ranges.
TAKING A MEASUREMENT
