11
M1.2.LD2.NLFREN - 05122017
EN
The shortwave infrared curing lamp is divided into 3 parts (a base, a column and a cassette).
1. Installation of the base.
a. Open the packing of the base.
b. Install the four wheels on the base respectively and tighten up the screws. Usually, the wheels with brakes should be
mounted on the rear of the base.
2. Installation of the column.
a. Open the packing of the column.
b. Put the column vertically on the top of the base, directly engage the screw holes and tighten up using the screws.
c. Connect the support arm with the column for supporting the cassette.
d. Connect the lifter with the column to control the up and down movement of the cassette.
3. Installation of the cassette.
a. Open the packing of the cassette with care.
b. Connect cassette with holder and tighten up with the screws.
c. Connect control wires and adjust the angle of cassette.
4 Controls
1. Power adjustment
2. Time adjustment
Page 4
1.
2.
Power Adjustment
Time Adjustment
AC220V
-
240V
50
/
60Hz
00
10
20
30
40
50
60
ON
TIME
CONTROL
SYSTEM
POWER
CONTROL
SYSTEM
1
2
10
20
30
40
50
60
70
80
80
60
00
10
0
90
4. Controls
copyrighted
document
- all
rights
reserved
by
FBC
