8
M1.3.CATM.NLFREN 30112018
EN
TOOLS
1 Safety instructions
• Study, understand and follow all instructions before operating this device.
• Do not exceed rated capacity.
• Use only on hard, level surfaces, with less than 3 degrees of slope.
• Lifting device only. Immediately after lifting, support the vehicle with appropriate means.
• Do not move or dolly the vehicle while on the jack.
•
Lift only on areas of the vehicle as specified by the vehicle manufacturer.
• No alterations shall be made to this product.
• Only attachments and/or adapters supplied by the manufacturer shall be used.
• Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
• Center load on saddle prior to lifting.
• Use wheel chocks or other blocking device on opposing wheels before using jack.
• Never use on a lawn mower or lawn tractor.
•
Do not use this jack for any use other than the manufacturer specified usage.
• Do not rock the vehicle while working on or around equipment.
• The following are not recommended for supporting on this equipment: foundations, homes, mobile homes, trailers, RV’s,
campers, nor fifth wheels, etc.
• Failure to heed this safety instructions may result in personal injury and/or property damage.
2 Technical specifications
Model
Capacity
Minimum
height
Lifting height Adjustable
height
Maximum
height
Net weight
CATM11030
3 ton
188 mm
115 mm
60 mm
363 mm
2.8 kg
CATM11050
5 ton
207 mm
125 mm
70 mm
402 mm
3.7 kg
CATM11080
8 ton
222 mm
145 mm
80 mm
447 mm
4.8 kg
CATM11120
12 ton
227 mm
150 mm
80 mm
457 mm
6.1 mm
CATM11200
20 ton
235 mm
150 mm
60 mm
445 mm
8.7 kg
CATM11300
32 ton
260 mm
160 mm
/
420 mm
17.8 kg
3 Operation
WARNING!
•
The owner and/or operator is responsible for providing maintenance, maintaining all decals or
warning labels and while in use, maintaining the unit in good work order.
•
Make sure that the operator understands the operating instructions. Safety information shall
be emphasized and understood prior to usage.
•
The jack shall be inspected per the instruction manual prior to use.
•
It is the owner and/or operators responsibility to study all warnings, operating and
maintenance instructions contained on the product label and instruction manual prior to
operation of this unit. The owner/operators shall retain product instructions for future
reference.
3.1 Raising vehicle
1. Make sure the jack and vehicle are on a hard level surface.
2. Always set the vehicle parking brake and block the wheels.
3. Consult the vehicle owners manual to ascertain the location of jack points and position the jack beneath the prescribed lift
points.
4. Turn the release valve clockwise to the closed position. DO NOT OVERTIGHTEN!
5. To raise the vehicle to designed height, place the handle into the socket and pump up and down.
6. Place jack stands beneath the vehicle at locations recommended by the vehicle manufacturer. Do not get under the vehicle
without jack stands. Jacks are not designed to maintain heavy loads for long periods of time. Do not attempt to put the jack
stand simultaneously under both ends of the vehicle or under one side of the vehicle.
7. Turn the release valve SLOWLY counterclockwise to lower load onto jack stands.
copyrighted
document
- all
rights
reserved
by
FBC