background image

 

25

M1.3.BT100-BT100M.NLFREN   28082018

EN

13  Trouble shooting

Problem

Reason

Solution

The turntable rotate just in one direction 

or can’t rotate.

Reverse switch broken.

Replace the reverse switch.

Belt broken.

Replace the belt.

Motor’s malfunction.

Check the motor cable or terminal block 

wire.

Replace the motor if it is broken.

Demount or fix the wheel, the turntable 

can’t lock.

The jaws delay to open/close.

The turntable locks the rim incorrectly.

Leakage of air network.

Check all the parts on the air network.

The clamping cylinder can’t work.

Replace the cylinder piston.

Worn jaws.

Replace the jaws.

Broken washers of the chuck cylinder.

Replace it.

The mounting/demounting head always 

touch the rim during operation.

The locking plate incorrectly adjust or 

unqualified.

Replace or adjust it.

Screws on the chuck loose. The 

hexagonal vertical arm can’t be locked 

by locking plate.

Tighten the screws, replace the locking 

plate.

The bead breaker pedal and jaw open 

and close pedal can’t turn back to the 

original position.

Pedal spring broken.

Replace it.

The bead breaker shovel operates 

difficultly.

Jammed silencer.

Clean it or replace it.

The washer on the bead breaker 

cylinder is broken.

Replace it.

copyrighted 

document 

- all 

rights 

reserved 

by 

FBC

Summary of Contents for 754563090






































Reviews: