9
M1.2.VP60-VP200.NLFREN - 08022018
EN
•
Do not exceed the recommended operating air pressure. This could damage equipment. See specifications.
•
Keep a type abc fire extinguisher nearby in case of fires.
•
Always protect your skin and eyes from contact with grease.
2 Technical specifications
Model
VP60
VP200
Duty of trolley
20 - 60 kg
180 - 200 kg
Drum cover diameter of grease tank
385 mm
600 mm
Follower plate diameter
370 mm
585 mm
Grease outlet pressure
300~400 bar (4350~5800 psi)
300~400 bar (4350~5800 psi)
Air pressure
6~8 MPa (87~115 psi)
6~8 MPa (87~115 psi)
Pump ratio
50:1
50:1
Hose connection
1/4’’
1/4’’
Hose length
4 m
4 m
Description:
Power from air compressor which is safe, environmental-friendly and free of spark.
Spare parts: See pages 11-12
3 Operation
3.1 Preparation
1.
Put grease tank on the trolley.
2.
Put the pump, upper cover with follower plate into the grease tank, slowly in 20~30°gradient.
3. Make sure close connection between grease and rubber plate.
4.
Screw on the fastener (both on the follower plate and handle bar) with grease tank in order to fix.
5. Take the upper cover up. Fill the grease into tank.
6. Put the upper cover down in a straight vertical direction, until the oil inlet of pump reaching the bottom of tank.
7.
Screw the nuts tightly.
8.
Now it is ready for filling grease.
3.2 Filling grease
1. Connect the air inlet with air compressor.
2.
Aim the grease filling gun at the right point.
3.
Shooting gradually according to the amount of grease required.
4. Turn off the air compressor, remove the pipe on the machine.
5.
Clear the grease filling gun, also working area.
6
6. Put the upper cover down in a straight vertical direction.Untill the oil
inlet of pump reaching the bottom of tank.
7. Screw the nuts tightly.
8. Now it is ready for filling grease
Grease Filling
1. Connect the air inlet with air compressor.
2. Aim the grease filling gun at the right point.
3. Shooting gradually according to the amount of grease required.
4. Turn off the air compressor, remove the pipe on the machine
5. Clear the grease filling gun, also working area.
WARNING:
1. NEVER CONNECT WITH AIR COMPRESSOR EXCEPT
WORKING TASK.
2. NEVER AIM THE GUN TO PEOPLE, AINIMALS AND ETC. TO
AVOID INJURED AND DAMAGED.AS THE PRESSURE WITH
FULL GREASE CAN BE REACHED TO 5800PSI(400bar)
6
6. Put the upper cover down in a straight vertical direction.Untill the oil
inlet of pump reaching the bottom of tank.
7. Screw the nuts tightly.
8. Now it is ready for filling grease
Grease Filling
1. Connect the air inlet with air compressor.
2. Aim the grease filling gun at the right point.
3. Shooting gradually according to the amount of grease required.
4. Turn off the air compressor, remove the pipe on the machine
5. Clear the grease filling gun, also working area.
WARNING:
1. NEVER CONNECT WITH AIR COMPRESSOR EXCEPT
WORKING TASK.
2. NEVER AIM THE GUN TO PEOPLE, AINIMALS AND ETC. TO
AVOID INJURED AND DAMAGED.AS THE PRESSURE WITH
FULL GREASE CAN BE REACHED TO 5800PSI(400bar)
1
2
copyrighted
document
- all
rights
reserved
by
FBC
