52
EN
M1.1.BG20IM.NLFREN - 18102022
LOOK OUT!
• Do not exceed the rated power, and the total watt of the connected electrical equipment should be considered.
•
Do not exceed the fixed current limit of socket.
• Do not link the engine to the household circuit, or else the engine or the household circuit would be damaged.
• Do not modify the engine for other unintended purposes.
Please comply with the following regulations:
• Do not lengthen the vent-pipe at will.
• If you need to lengthen the cable, please use the soft cable with rubber cover. (Accord with IEC245 or relevant
requirements).
• The length requirement of the lengthened cable: 60 meter for 1.5 mm², and 100 meter for 2.5 mm². If the cable is
too long, the resistance will become so large that the applicable electric power will decrease.
• Keep the generator far away from other wires and cables, such as business electricity supplying circuitry.
ATTENTION!
• The alternating and the direct electrical source can be used at the same time. If you want to use the alternating
current and direct current socket at the same time, make sure that the total electric power will not exceed the
summation of that of alternating and direct current.
• Most electrical equipment’s starting power is higher than the rating power.
6�1 Use of alternating current
1. Start the engine, and make sure the indicator light (green) is on.
2. Make sur that the switch of the electrical equipment to be used has been turned off, and then plug the generator into the
electrical equipment.
generator
generator,
generator
Copyrighted
document
All
rights
reserved
by
FBC
