MVP Patriot Megaject Innovator II, Operation Manual

Page: 6 / 78

Patriot Megaject Innovator II Operations Manual
Rev. 04/2014 Page | 6
SAFETY & WARNING INFORMATION:
OPERATING YOUR POLYESTER SYSTEM SAFELY
1. Introduction
Any tool, if used improperly, can be dangerous. Safety is ultimately the responsibility of those
using the tool. In like manner, safe operation of polyester processes is the responsibility of those
who use such processes and those who operate the equipment. This manual outlines
procedures to be followed in conducting polyester operations safety. This system has been
specifically designed for use of Polyester Resin, Gel-Coat, and Methyl Ethyl Ketone Peroxides
(MEKP) applications. Other formulations or blends considered for use in this equipment is
strictly prohibited without the expressed consent by Magnum Venus Products Inc. Magnum
Venus Products cannot eliminate every danger nor foresee every circumstance that might
cause an injury during equipment operation. Some risks, such as the high pressure liquid
stream that exits the spray tip, are inherent to the nature of the machine operation and are
necessary to the process in order to manufacture the end-product. For this reason, ALL
personnel involved in polyester operations should read and understand the Safety Manual. It is
very important for the safety of employees involved in the operation that equipment operators,
maintenance and supervisory personnel understand the requirements for safe operation. Each
user should examine his own operation, develop his own safety program and be assured that
his equipment operators follow correct procedures. Magnum Venus Products hopes that this
manual is helpful to the user and recommends that the precautions in this manual be included in
any such program. Magnum Venus Products recommends this Safety Manual remain on your
equipment at all times for your personnel safety. In addition to the manual, Magnum Venus
Products recommends that the user consult the regulations established under the Occupational
Safety & Health Act (OSHA), particularly the following sections:
1910.94 Pertaining to Ventilation.
1910.106 Pertaining to flammable liquids
1910.107 Pertaining to spray finishing operations, particularly Paragraph (m) Organic Peroxides
and Dual Component Coatings.
Other standards and recognized authorities to consult are the National Fire Protection
Association (NFPA) bulletins as follows:
NFPA No.33 Chapter 14, Organic Peroxides and Dual Component Materials
NFPA No.63 Dust Explosion Prevention
NFPA No.70 National Electrical Code
NFPA No.77 Static Electricity
NFPA No.91 Blower and Exhaust System
NFPA No.654 Plastics Industry Dust Hazards