MVP Patriot Megaject Innovator II, Operation Manual

Page: 48 / 78

Patriot Megaject Innovator II Operations Manual
Rev. 04/2014 Page | 48
Fig. 20
Mixer Tubes:
(see figure 19)
Mixer tubes will only require replacement if partial or full gelation/sedimentation has
occurred in the injection head. They cannot be repaired and must be replaced.
To replace, first remove Mould Pressure Guard (MPG) signal pipes and remove mixer
shroud from head.
Remove mixer tube from inside shroud. Lightly grease new mixer tube/shroud threads
with silicon grease, ensure shroud internal O-ring (0749) is in position and replace in
mixer shroud.
Re-attach to mixer head and reconnect MPG pipes.