MVG NeptuLink, User Manual, Page: 17 / 36

17
EN
Illustration 1: Network Connection
Properties dialog box.
Illustration 2: Internet Protocol version
4 (TCP/IPv4) Properties dialog box.
Appendix
This Appendix contains links to reference
documents explaining the technologies that
your terminal uses:
Configuring your computer
for DHCP
To access your terminal, you will need to use
the DHCP (Dynamic Host Configuration Proto-
col). Your terminal will contact a DHCP server,
which automatically assigns an IP address to
the computer connected to the Ethernet port.
To activate DHCP, follow the steps below:
➊
Click
Start
, then
Control Panel
and
Network and Sharing Center .
➋
To display the network connections, click the
Change card settings
link on the left-hand
side of the Network and Sharing Center
panel.
➌
Right-click the connection you wish to
change, then click
Properties . Enter
an administrator password or confirm the
change if prompted to do so.
➍
Click
Internet Protocol version 4 (TCP/
IPv4) then Properties.
➎
Click
Obtain an IP address automatically.
➏
Click Obtain DNS Server addresses auto-
matically.
➐
Click OK to close the dialog box. Your com-
puter is now configured for DHCP.
Document Link
Technical features NeptuLink_Datasheet_EN.pdf