MV Agusta F4 1000 S, Workshop Manual

Page: 97 / 428

Maintenance
- 81 -
B
Changing the unit of measurement
Allows for simultaneous editing of the following units of
measure:
• Speed
• Distance covered
WARNING
The modification or adjustment of display
functions must be carried out with the engi-
ne off and running on neutral, with the
motorcycle stopped with the stands on the
ground. Changing display settings while
running is prohibited.
- Access the "SERVICE" mode as described in the pre-
ceding pages, and press the "SET" button for less
than four seconds to until the message "UNIT CHAN-
GE" appears.
- Press the "OK " button for less than four seconds and
the unit on the speedometer will begin to flash.
- Press the "SET" button to pass from Km/h to Mph and
vice-versa. Changing the unit of measurement on the
speedometer automatically varies the following sizes:
• Odometer (total and partial): Km –> mi
If you press the "OK" button for longer than four
seconds, the modification procedure of the measure-
ment units will be interrupted.