© MuxLab Inc.
Active Component Video Balun Kit Installation Guide
Page 12
12.
The following table provides suggested rotary switch
settings for adjusting picture brightness.
Brightness Setting
Actual Gain
Less
-25%
None
0%
Medium
25%
High
50%
Table 1: Rotary Switch Settings for Brightness
Adjustment
13.
To adjust picture sharpness, begin with the sharpness
potentiometer
(“Sharp”)
rotated
completely
counterclockwise, and slowly rotate it in the
clockwise direction until picture details become
clear.
Note:
For display equipment with automatic brightness control
(for example, certain models of projectors), complete all
installation procedures and ensure that the brightness rotary
switch (“Bright”) is set to “None” and the sharpness
potentiometer (“Sharp”) is rotated completely counterclockwise
before turning the display equipment on. Otherwise, the display
could override the brightness adjustment feature of the
VideoEase Active Component Balun Kit.
