MuxLab ProDigital 500790, Operation Manual

Page: 28 / 49

HDMI/IP PTZ Camera 30X Zoom, PoE Operation Manual
28
6.6.3 Image Setup
1)
Brightness
Image brightness range is from 0 to 14. The slider
control shows the corresponding numerical value
on the right. Default is 7.
2)
Saturation
Image saturation range is from 0 to 14. The slider
control shows the corresponding numerical value
on the right. Default is 4.
3)
Contrast
Image contrast range is from 0 to 14. The slider
control shows the corresponding numerical value
on the right. Default is 10.
4)
Sharpness
Image sharpness range is from 0 to 15. The slider
control shows the corresponding numerical value
on the right. Default is 3.
5)
Hue
Image hue range is from 0 to 14. The slider control
shows the corresponding numerical value on the
right. Default is 7.
6)
Flip & Mirror
Enable the Flip button to flip the image horizontally.
Enable the Mirror button to flip the image vertically
(from right to left). Default mode is disabled
(buttons not selected).
7)
Apply/Cancel/Default Button
After adjusting parameters, press the "Apply"
button to save, press the " Cancel" button to cancel
any changes, and press the "Default" button to
recall the default settings.
6.6.4 Audio Setup
1)
Audio Switch
Enable or disable audio switch
2)
Audio Type
Audio type AAC
3)
Sample rate
Sample rate: 44.1K or 48K.
4)
Bit rate
Bit rate: 96K, 128K, or 256K.
5)
Input Type
Line In only.
6)
Input VolL
Set volume of the left channel.
7)
Input VolR
Set volume of the right channel.