KVM DVI over IP PoE Extender - 500771
© MuxLab Inc. 2016
94-000846-A / SE-000846-A
Page 6
3 On Screen Display (OSD) Switching Method
The OSD Switching Method does not rely on the Dip Switch setting and thus is not limited to only 16
workstations. This method supports 100’s of workstations.
To activate the OSD, quickly press “Scroll Lock” three times. This brings up the KVM OSD Menu, with a
pulldown tab to select from many workstations (scroll through the pulldown menu to select the desired
workstation). In addition, each KVM Transmitter can have a user defined alpha numeric name that is
representative of the attached workstation. For example the KVM Transmitter that is connected to the
main email server can have the name “Email Server 1” or “Main Email Server”.
The main KVM OSD Menu offers the operator a simple and clean menu selection as shown below. Note
that while the OSD is active, the operator is not connected to any workstation.
Password Field:
The user must enter his or her password in this field in order to login and be
provided system access. The default password is “admin”.
Login:
Type in a valid password and click on “Login”. If accepted, then access is granted.
Logout:
Click on “Logout”, to log out of the system. Access is denied while logged out.
Node List:
This field shows the previous workstation selected. When clicking on the pulldown
arrow, a listing of all workstations that may be selected for control is presented. Use the scroll
bar to view all workstations.
Return:
Returns control of the previous workstation (prior to bringing up the OSD).
