DisplayPort 1.2a Fiber Extender Kit
Installation Guide
© MuxLab Inc. 2016
4
1. Introduction
1.1 Introduction to the 500502
The DisplayPort 1.2a Fiber Extender Kit, 500502 enables the user to transmit WQUXGA
(3840x22400) video at 60Hz signal up to 330ft (100m), with any form of scaling or data
compression being applied to the signal. This device support a total data throughput of
21.6Gbps (5.4Gbps per lane).
The unit supports two (2) LC connectors and may be connected with OM3 multi-mode
fiber between the Transmitter and Receiver, providing a clean, secure and easy
installation with ideal electrical isolation, and immune to electrical hazard and
interference. The 500502 may be powered via USB power (with the included power
supply), or from the 3.3V supplied from pin #20 of the DisplayPort connector of the
source and display equipment. Note that if the source or display equipment does not
adequately supply this power on its DisplayPort connector, then the included power
supply must be used.
1.2 Features
Supports the DisplayPort 1.2a standard
Up to 330ft (100m) over 50/125
m multi-mode fiber (OM3) at WQUXGA
(3840x2400) resolution, @ 60Hz refresh rate
Bandwidth of 21.6Gbps, supporting up to WQUXGA 3840X2400 @ 60Hz
Supports Dual-Mode DP (DP++)
Supports auxiliary/I
2
C channel over fiber
Compact Metal Enclosure for a robust and easy installation
1.3 Package Contents
One (1) DisplayPort 1.2a Fiber Transmitter
One (1) DisplayPort 1.2a Fiber Receiver
Two (2) Power Supplies, 5VDC @ 1A with interchangeable US, UK & Euro
Blades
Two (2) USB type A to micro USB cables
One (1) User Manual
Notes
：
Please confirm if the product and the accessories are all included, if not please
contact your dealer.
