HDMI 2.0 Fiber Extender Kit
Installation Guide
© MuxLab Inc. 2017
4
1. Introduction
1.1 Introduction to the 500464
The HDMI 2.0 Fiber Extender Kit, 500464 enables the user to transmit 4K (4096x2160)
video at 60Hz signal up to 330ft (100m), with any form of scaling or data compression
being applied to the signal. This device supports a total data throughput of 18Gbps
(6Gbps per lane).
The unit supports two (2) LC connectors and may be connected with OM3 multi-mode
fiber between the Transmitter and Receiver, providing a clean, secure and easy
installation with ideal electrical isolation, and immune to electrical hazard and
interference. The 500464 Transmitter may be powered via USB power (with the
included power supply), or from the 5V supplied from pin #18 of the HDMI connector of
the source side only. Note that if the source does not adequately supply this power on its
HDMI connector, then the included power supply must be used.
1.2 Features
Supports the HDMI 2.0 standard
Up to 330ft (100m) over 50/125
m multi-mode fiber (OM3) at 4K (4096x2160)
resolution, @ 60Hz refresh rate
Bandwidth of 18Gbps, supporting up to 4K (4096X2160) @ 60Hz
Supports CEC, EDID & HDCP 2.2
High retention HDMI connector to prevent accidental disconnection
Compact Metal Enclosure for a robust and easy installation
1.3 Package Contents
One (1) HDMI 2.0 Fiber Transmitter
One (1) HDMI 2.0 Fiber Receiver
Two (2) Power Supplies, 5VDC @ 1A with interchangeable US, UK & Euro
Blades
Two (2) USB type A to micro USB cables
One (1) User Manual
Notes
：
Confirm that the product and accessories are all included, if not please contact
your dealer.
