HDMI 4x4 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2017
17
5.2. IR Control
5.2.1. IR Remote
Connect an IR receiver to the
IR EYE
port of the Matrix Switch, users can control it
through the included IR remote. Here is a brief introduction to the IR remote.
①
Standby button, press it to enter/exit standby mode.
②
INPUTS:
There are four (4) Input channel selection buttons. The
corresponding IR signal port switches synchronously
when switching input channels.
③
OUTPUTS:
Output channel selection buttons.
④
Menu buttons: ALL, EDID, CLEAR and ENTER.
ALL
: Select all outputs.
EDID
management button: Enables the Input port to
manually capture and learn the EDID data of output
devices.
CLEAR:
Cancel an operation in progress, before it
have been completed, such as switching an output
channel. Pressing this button will return the Matrix to
its previous status.
ENTER:
Confirms/executes an operation.
By using the IR Remote & HDBT transmission technology, the 4K Home Distribution
Hub Kit supports the following capabilities:
1)
Locally control a far-end output device.
2)
Control local input/output devices remotely.
3)
Control the Matrix Switch, either locally or remotely.
