Muton ValuejetVJ-1604, Maintenance Manual

Page: 152 / 422

4 Parts Replacement VJ-1604 Maintenance Manual
Rev.-00 4-110
4.8.6 Replacing Cursor Roller Arm Assembly
1. Remove the head cover.
"4.8.6 Replacing Cursor Roller Arm Assembly" p.4-110
2. Lift up the cursor roller arm assembly to the direction shown below, and lift up the cursor arm spring.
CAUTION
Note that the tension of the cursor arm spring is high.
3. Confirm that the bearing is detached from the cursor guide.
4. Pull off the cursor roller arm to the direction shown below with the cursor arm spring being lifted up.
5. Replace the cursor roller arm assembly.
NOTE
Five parts are accompanied when removing the cursor roller arm. They are collectively called cursor
roller arm assembly except for the cursor arm spring.
6. To reassemble the unit, reverse the removal procedure.
4.8.7 Removing Print Head Cover
1. Open the maintenance cover R.
2. Remove the side top cover R.
"4.2.6 Removing Side Top Cover R" p.4-12
No. Part name
1 Cursor roller arm
2 Cursor arm spring
Left view
Right view
2
1
2
1
Ԙ
ԙ
Ԙ
ԙ