-3-
CS3002-05
4
5
1
3
2
Open the maintenance cover on the right of the
printer and remove it.
4.
Cleaning of cleaning wiper and the circumference of the cap
Attach the maintenance cover on the right of the printer and close it.
Next finish the daily maintenance.
DO NOT touch the absorber
(the yellow portions in the illustration right)
Use the cleaning stick to remove the ink and
dust on the circumference of the cap.
Cleaning required
Use the cleaning stick to clean the left side
surface of the cleaning wiper (a black rubber
part).
Clean the right side surface of the cleaning
wiper.
3.
Cleaning of print head circumference
2
3
1
Look the bottom of the carriage.
Check if dusts and ink deposit are adhered.
Print head circumference (silver metal part)
Print head guide part (black plastic part)
If maintenance cleaner is splashed onto the printer,
use a paper towel to wipe it off.
If dusts or ink deposit are adhered, clean with a cleaning stick.
Print head circumference (silver metal part)
Print head guide part (black plastic part)
Cleaning required
DO NOT touch the surface of a print head (the yellow portions in the illustration below)
Attach the maintenance cover on the left of the printer and close it.
Next clean the cleaning wiper and the cap circumference.
Print head circumference
Print head guide part
