Mustang Mustang Powered Wheelchair, User Manual

Page: 8 / 24

OPERATING INSTRUCTIONS
The SHARK D-type controller
.
The speed of the CORGI HI-LO is
controlled pressing either the Tortoise or
the Rabbit on the controller as seen in the
picture. The ring of lights indicate the speed
level set. Within this speed setting, the
joystick provides variable speed.
If you find that this is being adjusted to
maximum speed when it would be unsafe,
you may wish to have the controller
programmed to reduce the speed. The
speed settings should be programmed by
your provider. The acceleration speed and
the turn acceleration can be set to be appropriate to the user’s reactions and driving ability
Operating the Lights.
Pressing this button will switch on the
headlights and the rear tail lights. All of the
lighting uses LED technology to reduce the
power requirement and to ensure that the
lighting units do not over heat
To indicate your intentions when turning, the
arrow keys are used to activate the relevant
indicator light on the rear of the chair. If you
are carrying out a confusing manoeuvre
press the triangle button, which will activate
the hazard warning lights on the rear of the
wheelchair
To Immobilise the Mustang, press the ‘On’ button, release, then hold the
‘On’ button down until it beeps twice. This will prevent unauthorised use
of the chair. To release this lock mode, switch ‘On’ and press the horn
button twice
4