Mustang Mustang Powered Wheelchair, User Manual

Page: 15 / 24

INDIVIDUAL SWINGAWAY AND FLIP-UP FOOTPLATES
The individual swingaway footplates allow access for self loading. The footrest hangers are
removable, or they can be rotated out of the way. The footplates themselves flip up, which may be
sufficient for some situations.
The footrest hanger fits onto the receiver
as shown, and swings towards the
centre to lock into place.
ADJUSTING THE HEIGHT OF THE SWINGAWAY FOOTPLATES.
The footplates are adjusted for height by releasing the clamp on the footrest hanger, which will
allow the footrest piece to slide in and out to the desired position.
HEADREST
HEIGHT ADJUSTMENT
The headrest can be lowered or raised by using the screw fitting on the silver
block at the top of the chair back. When loosened the main bar can be moved
and the screw re-tightened.
Ensure the screw is fully tightened before the child uses the headrest.
TRAY TABLE ACCESSORY
The tray table is fitted into the armrest by a long pin attached to the
underside of the tray, which is inserted into a hole in the end of the
armrest. This will then slide along so the tray is secure around the
child. There is a rubber rim around the edge of the tray to prevent
objects falling off.
11