Mustang Mustang Powered Wheelchair, User Manual

Page: 7 / 24

2
OPERATING INSTRUCTIONS
The Remote or Joystick controller.
In this picture you will see the ON/OFF switch in the
centre of the controller near the battery indicator lights.
The eight coloured lights indicate the level of charge left
in the batteries. With all lights showing with full charge,
and red lights being a low charge warning. The Horn is at
the centre of the remote joystick denoted by the bugle
symbol.
The Seat Function button is located below
the On/Off switch. To enter the Seat
Function press th
is button. The number ‘1’
on the left hand side will show when you are
using the seat raise function, and the number
2 will show that you are in Tilt Mode.
The Seat is raised using an Electric Linear
actuator, which can be stopped in any
position.
The joystick is used to control the seat actuators. To raise the seat in Mode 1, the joystick
should be pulled backwards. Release the joystick when you have reached the desired height.
The Joystick should be pushed forwards for the seat to lower down again.
To tilt the seat back in Mode 2 the joystick should be pulled backwards and then pushed
forwards to tilt to the upright position.
3