14
REPACKING YOUR PFD
BEFORE FOLLOWING THE REPACKING SEQUENCE, BE SURE TO PROPERLY RE-ARM
YOUR PFD, PAGE 10. ENSURE ALL AIR IS REMOVED BEFORE REPACKING.
1. Lay the PFD on a flat, clean surface.
2. Fold wearer’s right side (A) inward along the full length of the PFD
(Fig. 19). Fold cover (B) over; covering side (A) (Fig. 20).
FIGURE 19
FIGURE 20
RIGHT SIDE A
RIGHT SIDE B
3. Repeat step 2 on left with side (C) (Fig. 21), and cover (D) (Fig. 22).
FIGURE 21
FIGURE 22
LEFT SIDE C
LEFT SIDE D
4. Ensure the inflator body is still located within its protective cap
cover and that the single point status indicator is visible through
the inflator window panel (Fig. 18).
C
D
B
D
C
D
B
A
Summary of Contents for MD3188
Page 35: ...32 ...
