12
FIGURE 11
FIGURE 12
FIGURE 13
Red Indicator
Inflator Body
Sealing Ring
Red Indicator
Trash
Green Indicator
Caution:
Do not turn
the center
shaft
FIGURE 14
Single
Point
Indicator
Water
Inlet
Valve
4. Squeeze the sealing ring to elongate and remove the inflator body
through the sealing ring (Fig. 11).
5. Dispose of the used inflator body (Fig. 12).
6. Check that the new inflator body indicator is green. Insert the
new inflator body with CO
2
cylinder pointing upward inside the
PFD (Fig. 13). Let the sealing ring rest on the adapter around the
four lugs.
7. Now check the new manual/automatic cap as follows (Fig. 14):
• Is the single point status indicator showing green?
• Is the expiry date OK?
If YES is the answer to both questions, then proceed as follows. If the
answer is NO to either question, get a new cap.
REMOVE CYLINDER
RED=TRASH
INSERT CYLINDER
CHECK CAP
Summary of Contents for MD3188
Page 35: ...32 ...
