16
3.
Perform the Leak test as described in Every 2 months care and
maintenance instructions (p. 15).
4.
Deflate as outlined in Deflating, (p. 11).
5.
Ensure green status indicator pin is in place.
6.
Record as an “Annual” inspection in permanent ink on the Care and
Storage label, located in the inflator assembly area.
CLEANING AND STORING
To clean your flotation device:
- Hand wash flotation device or sponge it down in warm, soapy water
- Rinse with clean water
- Hang to dry on a plastic coat hanger
- Store the dry flotation device in a warm, dry, and well ventilated
place out of direct sunlight.
DO NOT DRY-CLEAN, USE CHLORINE BLEACH, OR APPLY DIRECT HEAT.
