13
FIGURE 16
FIGURE 17
FIGURE 18
FIGURE 20
FIGURE 19
3.
Remove the empty cylinder.
4.
Re-install the pull handle.
OK
OK
OK
GREEN PIN
ENSURE LEVER ARM IS DOWN
AND HOLES ALIGNED
FRAGILE
5.
Check the manual inflation system to determine that the lever arm
and piercing pin move freely when moving the lever (attached
to the pull tab) several times down and up. There should be no
binding of mechanical parts.
6.
Position lever arm down. Insert green pin.
7.
Install new cylinder. Hand-tighten.
There is a second elastic keeper in the inflator area, meant to hold a
second 12g CO
2
cylinder (not supplied).
8.
Tuck the labels back in, over the inflation assembly, and close the
Velcro ™ tapes at the bottom of the device.
