Issue 1
Page 4 of
13
GENERAL ADVICE
Installation, Precautions & User Information
This new M8 500S is designed and built to provide trouble-free performance, but as with all electronic devices it
is necessary to observe a few precautions:
This unit features a
BRIDGED
speaker output and should
NOT
be grounded on either speaker output
terminal as both red and black speaker terminals are effectively “hot”, i.e. carry high current signals. Please
check if using
any
active “sub”, electrostatic, or other non standard potentially grounded speaker types
directly connected to the speaker outputs of the M8 500S. Consult speaker manual or supplier if in doubt.
Heed all warnings shown on the back of the product.
Only connect the M8 500S to a mains outlet having the same voltage as marked at the back of the unit.
Always ensure that when disconnecting and reconnecting audio equipment the mains supply is switched off.
Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by
items placed on them.
Do not use near water, or place water-filled containers on the M8 500S, for example, a flower vase or potted
plants.
If water does spill inside, immediately pull out the mains plug from the wall socket and inform
the dealer, who should then check the unit before further use. Entry of liquid into the M8 500S is
dangerous, and may cause electric shock or fire hazard.
Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
Do not remove any covers or try to gain access to the inside. There are no end-user changeable internal
adjustments or components. Refer all service work to an authorised Musical Fidelity agent.
* Note: Unauthorised opening of the equipment will invalidate any warranty claim.
Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they
may harm the surface finish.
The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged
by lightning. For protection of the audio system during electrical storms, remove the mains plugs.
If after-sales service is required, to help the dealer identify the M8 500S please quote the serial number located
on the rear panel of the unit.
