Issue 1
Page 12 of
13
SPECIFICATIONS
Output
Power
500 Watts per channel into 8 Ohms (27 dBW)
Voltage
63.4 Volts RMS, 20Hz to 20 kHz; onset of clipping
(179 Volts peak-to-peak)
Current peak-to-peak
200 Amps
Damping factor
>330
Output devices
6 pairs per channel
Line input
THD+N
<0.007% typical, 20 Hz to 20 kHz
Signal / noise ratio
>120 dB ‘A’-weighted
Input impedance
50k Ohms
Frequency response
+0, –1dB, 10Hz to 80 kHz
Connections
Line level inputs
1 pair line level XLR (fully balanced) connectors
1 pair line level RCA connectors
Line level outputs
1 pair line level XLR (balanced) connector loop output
1 pair line level RCA connector loop output
Speaker outputs
2 sets of 2 pairs 4mm banana plug/binding posts
Trigger input
3.5mm (
⅛
”) mono jack ±4.5 to ±15V DC
Trigger output
3.5mm (
⅛
”) mono jack +12V DC
Power requirement
Mains voltages
115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz
(alternative)
Consumption 0.25
Watts
standby
(Orange LED lit)
150 Watts
on, idle
(Blue LED lit, no signal output)
2000 Watts
maximum
(Blue LED lit, full power output)
Weight
Unit only, unboxed
29 kg
(63¾ lbs)
In shipping carton
34.5 kg
(76 lbs)
Dimensions
Width
440 mm
(17
⅓
”)
Height (including feet)
160 mm
(6
⅓
”)
Depth (front to back) including terminals 460 mm
(18
⅛
”)
Standard accessories
IEC type mains lead (10-Amp type)
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice. E&OE.
