6
Facilities & Connections M6x 250.4/2
1
Power/Standby button and LED’s
Turns the unit on or off. You can also use the trigger input to automatically turn on your
device. It will turn on when an external source provides 5-30V on the trigger input.
2
Status LEDs for each channel
Blue LEDs: device is turned on and ready
Red LEDs: fault condition: Overheated, short circuit, DC on outputs
Dimmed red LEDs: standby mode is active
1
Speaker output
2
XLR Balanced Input
3
Stereo/Bridge Mode Switch
4
RCA Analogue input
5
RCA Analogue output (through)
6
Trigger ON/OFF
7
Power ON/OFF switch
8
Trigger IN/OUT
9
Mains IEC sockets
1
2
3 4
6
7
8
9
5
1
2