Music & Lights Pro Truss TL Series, User Manual

Page: 29 / 40

11
TL series
5. Repeat steps “3” and “4” for the
subsequent frames until you
reach the desired height , taking
always care of the load state.
4. Keep on turning the crank until
you hear the click of the safety
pin in the subsequent stopping
hole of the last frame. Repeat, if
necessary, step 3 until you reach
the proper height for the first
frame.
Warning!
Verify that all the frames are locked
by means of the safety pins.
5
Blocked
pin
4
Click and
automatic
stop in the
second hole
3. While pulling the safety pin ring
of the last frame, turn the crank
clockwise. The last frame raises
and the stopping hole shifts
upward. Release the safety pin
when the hole is not coincident
anymore (fig 3.1).
Pin released
from the hole
Fig.3
3
- 3 - ELEVATION
3.1 LIFTING PROCESS
1. Put the load on the lifter by means of the proper support without exceeding the maximum load as
specified in the technical data;
2. Control that the load is well centered on the unit, in order to facilitate the correct lifting without loss
of balance.