background image

MAINTENANCE

17

F–041306C

LUBRICATION

Every 25 hours and/or at the beginning of

each season, make sure the gear box is

filled with lubricant (see Figure 12). Tubes of

gear lubricant are available from most auto-

motive supply stores. Use portable tool

grease such as Lubriplate 630AA (Product

No. 06787, 1–3/4 oz. tube) or Lubriplate

GR–132 (Product No. 15892, 10 oz. tube).

After cleaning and before storage, apply oil

to the 

tine shaft

 (see Figure 12).

WARNING: Allow the transmis-

sion to cool before filling with

grease.

1. Remove both left side tines. See “How

To Replace The Tines” in the Service

and Adjustments section.

2. Remove the 

air vent screw

 (see

Figure 12).

3. Mount a grease gun onto the 

grease fit-

ting

. Fill the transmission until the

grease begins to come out of the air vent

screw hole.

4. Reinstall the 

air vent screw

.

5. Check the condition of the 

felt washer

(see Figure 12). Replace the 

felt wash-

er

 if it is damaged (see the Repair Parts

section in this manual).

6. Clean and lubricate the 

tine shaft

 with a

few drops of oil.

7. Reinstall the left side tines.
8. Remove the right side tines. Check the

felt washer

 for damage. Clean and oil

the 

tine shaft

. Reinstall the right side

tines.

Figure 12

Grease Fitting

Tine

Shaft

Air Vent Screw

Felt

Washer

HOW TO CLEAN THE TINES

Always remove dirt and debris from the culti-

vator after each use. Remove any string,

wire or vegetation that may become lodged

in the mechanism and stop the tines from

rotating.
1. Release the throttle control and move

the on–off switch to the OFF position.

Disconnect the spark plug wire from the

spark plug.

2. While wearing gloves, remove the 

hair-

pins

 and 

clevis pins

 that secure the tine

assemblies to the shaft (see Figure 13).

Remove the tines from the shaft.

3. Remove any lodged debris from the

shaft and tines. Clean and lubricate the

tine shaft with a few drops of oil.

4. Reassemble the tines on the shaft and

secure with a clevis pin and hairpin.

5. Connect the spark plug wire to the spark

plug.

Figure 13

Clevis

Pins

Hair Pins

Tines

Summary of Contents for 11052x4NC









































































Reviews: