Manual
MIRO
GSM
33
that time. In other words, the input signal is ignored during the set delay time. This prevents instable
input signals, or input impulses that occur repeatedly, to send identical SMS messages several times.
Time delays can be set between 0.1 seconds and 99.9 hours.
Note
It is recommended to activate the delay function (prevents the transmission of
several SMS messages for the same event).
6.4.5 Time-delayed Messages on Output OFF
If an input changes its state from "HIGH" to "LOW", a delayed message can also be activated. The
MIRO GSM sends the predefined message after the preset time elapses and provided the affected
input is still "LOW". This prevents instable input signals, or input impulses that occur repeatedly, to
send identical SMS messages several times. Time delays can be set between 0.1 seconds and 99.9
hours.
Note
It is recommended to activate the delay function (prevents the transmission of
several SMS messages for the same event).
6.4.6 Analog Inputs (MIRO GSM ADI6 DO4R 24 VDC, Art. No. 52531)
The 6 inputs can be individually configured as digital or analog inputs. For this purpose, each input
must be defined explicitly as an analog or digital input. The analog inputs are designed for a
standardized 0 to 10 VDC analog signal. The resolution here is 12.5 mV across the whole range.
www.comoso.com
