Manual
MIRO
GSM
30
Attach state of all inputs and outputs to each message
This options attaches the state of all inputs and outputs to each message.
Periodic message
The periodic message is intended for function checking and confirms device functionality. A
message is sent periodically. The message can be sent daily (time), weekly (time, weekday), or
monthly (time, date). The message text can be edited. The message also contains the current
state of the inputs and outputs if they are activated.
Message at the start
This message is sent to the pre-assigned phone numbers at each start-up (switch on / power
restore). The message text can be edited.
Message in case of power failure
This message is sent to the pre-assigned phone numbers in case the MIRO GSM suffers a power
failure. The message text can be edited.
Note
Not all special characters can be used for SMS messages. The characters are
recognized by the programming software and displayed in an error window. The error
characters must then be deleted.
Trailing Message Info
The trailing information of each message (date, time, remaining credit) can be activated or
deactivated in the field
Trailing Message Info
located in the
Settings
tab.
Fig. 18: Trailing Message Info
www.comoso.com