Introduction
User manual 57120_hdb_en_12
5 / 70
1
Introduction
1.1
Service and support
Sales
Support is available at all times from our technicians, office support team and
field service staff.
CONNECTIVITY
system advisors
Our system advisors are your competent contact partners if you want to devel-
op CONNECTIVITY solutions. They cooperate with you to find the best solu-
tions for your electrical installations.
Our CONNECTIVITY system advisors work with you to find ways to help you
permanently strengthen the competitiveness of your machines and systems.
Customer Service
Center (CSC)
Our staff of the Customer Service Center will help you with all questions con-
cerning installation and set-up. They support you, for example, if you have
problems with combining hardware and software products from different man-
ufacturers.
A number of support tools and measurement facilities are available for field
bus systems and EMC interferences.
Please do not hesitate to call us at +49 (0) 7191 47-2050 or send an e-mail to
Service addresses
Please visit our website to find your contact person:
www.murrelektronik.com
1.2
Introduction / about this document
Use of this
document
This document describes the use of the Terminal/power modulesFunction
modules incl. base from the Cube20S of Murrelektronik GmbH. It includes a
description of the design, engineering and application.
NOTE
Translation of the original manual.
1.3
Symbols
This document includes information and notes that have to be observed for
your own safety and to avoid injuries and material damage. They are marked
as follows:
DANGER!
Immediate danger
Failure to observe this warning involves an imminent risk of death or seri-
ous injuries.
WARNING!
Possible danger
Failure to observe this warning can lead to death or serious injuries.
