Murphy HelmView HV750, Operation Manual

Page: 14 / 32

Section 78 00-02-0805
12-09-11
-
12 -
WARNING SHUTDOWN
How to Hide/Show Faults
To hide the fault code pop-up displayed on the screen, press the soft key on the upper right
next to the
Hide
icon. The pop-up disappears, however the
Warning
or
Stop
icon remains on
the screen to indicate there is still a fault. Pressing the
Hide
soft key does not clear the fault; it
only hides the pop-up message.
When a fault code has been hidden, a
Recall
icon remains on the right side. When this soft
key is pressed, the fault code displays again. When a fault message is activated, a pop-up
message is displayed until the alarm is acknowledged by pressing the “Hide” key.
Warning showing
Warning hidden, Recall button showing
Scrolling Through Multiple Messages
The title-bar of the fault code pop-up may indicate multiple messages, as in ‘Diagnostic
Message 1 of 2. Use the
Previous
and
Next
soft keys to scroll through additional messages.