7
6.
CONNECTING DVD PLAYER - continued
7.
CONFIGURE THE TV
The DVD player is set to UK PAL TV type as standard; if NTSC is required, see section 19 for set up.
7.1
Place the DVD player horizontal on a flat level surface.
7.2
Connect the DVD player to your TV and / or audio system (as shown in the previous diagrams), plug in
and switch on at the mains. The blue power light will illuminate.
7.3
Insert the batteries into the remote control.
7.4
Press the STANDBY button on the DVD player to turn on the player and turn on the TV and amplifier (if
connected).
7.5
Select the video mode (AV) for the TV. If there is more than one video channel (AV1, AV2, etc) select the
source that the DVD player is connected to. See the TV instruction manual for tuning instructions if the set
does not automatically tune.
CAUTION !
ALL EQUIPMENT MUST BE TURNED OFF AND DISCONNECTED FROM THE MAINS BEFORE
INSTALLATION
To
HDMI
input
To
HDMI
output
Television
For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am until 5pm
IMPORTANT NOTE:
When connected via the HDMI cable, to get the picture and sound, you may need to select the HDMI input
on your TV with the TV remote control.
