BATTERY REPLACEMENT:
1. Remove the Bottom Access Panel from the back of the unit and pull the Battery Pack out of the Metal
Battery Box. Do not disconnect the Wires from the Battery Pack unless necessary.
2. Replace the six (6) Alkaline AA Batteries while observing polarity.
3. Put the Battery Pack back in the Metal Box and test for proper operation. Then re-install the Access
Panel.
WIRING DIAGRAM:
BATTERY PACK
SOLENOID
SENSOR
RED WIRES
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
Please visit
www.murdockmfg.com
for most current specifications.
7109-602-001
Revised: 11/27/17
Page 7 of 11
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
Outdoor Bottle Fillers