IMPORTANT:
1. Waste P-Trap and Water Supply Service Stop Valve to be supplied by other in accordance with local
codes.
2. Water supply is 3/8” copper tube (Fountain) & ½” male NPSM (Cuspidor). See Figure “E”. Waste is 1-
1/4” OD female slip joint connection.
3. Completely flush supply lines of all foreign debris before connecting to fixture. Optional water filter is
available should there be problems from the water supply with taste, odor, color or sediment.
4. WARNING: Warranty is voided if installation is not made following current Acorn Engineering
Company installation instructions and if components are assembled to the fixture that are not
approved by Acorn Engineering Company .
5. Fixtures operates within water pressure range of 20 to 105 psig. Acorn Engineering Company will not
warranty fixtures damaged when connected to supply lines with flow pressure lower than 20 psig or
higher than 105 psig. A pressure regulator must be furnished by others on supply line if inlet pressure
is greater than 105 psig.
™
™
™
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
CONTEMPORARY WATER COOLERS
I N S TA L L AT I O N / M A I N T E N A N C E I N S T R U C T I O N S
DRINKING FOUNTAINS
A181-CUSP
Page 3 of 9
02/26/16
7020-003-001
MURDOCK MFG. •
15125 Proctor Avenue • City of Industry, CA 91746 USA
Phone 800-453-7465 or 626-333-2543 • Fax 626-855-4860 • www.murdockmfg.com
Member of
